Galaxy 16 User instructions

Back to Index
Full set the system
1.	Enter [User code]
2.	Press [A]	Exit tone sounds
3.	Two confirmation tones will sound after 5 seconds
Part set the system
1.	Enter [User code]
2.	Press [B]
3.	Select part nr.1,2 or 3
4.	Press [Ent]	Exit tone sounds
5.	Two confirmation tones will sound after 5 seconds
Unset the system
1.	Enter [User code]
2.	Press [Ent]
Reset system after alarm condition
1.	Enter [User code]
2.	Press [Esc]
Remote reset after alarm condition
1.	Enter [User code]
2.	Press [Ent]	Display shows five digit number
3.	Quote above four digit number to alarm company	Ask for a "remote or coded reset"
4.	Enter [reply code from alarm co]
5.	Press [ENT]	display returns to date and time
Omit a zone
1.	Enter [User code]
2.	Press [Ent]	Omit appears as first menu
3.	Press [Ent]	Display shows zone 1
4.	Press [A] and [B]	To scroll between zones, until the correct zone appears
5.	Press [#]	To Omit zone
6.	Press [#]	Again to un omit
7.	Press [Ent]	Exit tone sounds
8.	Press [Esc]	Display shows Omit
9.	Press [Esc]	Display shows Current time and date
Change your own user code
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to Codes
4.	Press [Ent]	Display shows and user 1
5.	Press [A]	To scroll to code 14 where it will say Mgr (for manager code)
6.	Press [Ent]	Dislay shows 4 stars top right corner.
7.	Press [*]	4 times to delete code
8.	Enter new [User code]	Display shows new code
9.	Press [Ent] To save new code
10.	Press [#]	To enter to view more options for the Mgr code
11.	Press [Esc]	Display shows Codes
12.	Press [Esc]	Display shows Current time and date
Test the alarm sounders
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to test
4.	Press [Ent]
5.	Press [A]	To scroll to bell
6.	Press [#]	Sounders will sound
7.	Press [#]	to end test
8.	Press [Esc]	Display shows Test
9.	Press [Esc]	Display shows Current time and date
Walk test the detection devices
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to Walk test
4.	Press [Ent]
5.	Press [A]	To scroll to desired zone
6.	Press [#]	To enable
7.	Press [Ent]	To walt test zone, speaker and keypad will both sound when zone is passed trough
8.	Press [Esc]	To end test
9.	Press [Esc]	Display shows Walk
10.	Press [Esc]	Display shows Current time and date
11.	To view open zones
12.	Press [*] and [#]	Together to view
Setup user codes
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to Codes
4.	Press [Ent]	Display shows user 1
5.	Press [Ent]	Dislpay shows 4 stars top right corner.
6.	Press [*]	4 times to delete code
7.	Enter new [User code]	Display shows new code
8.	Press [Ent] To save new code
9.	Press [#]	To enter to view more options for the user code
10.	Press [Esc]	Display shows Codes
11.	Press [Esc]	Display shows Current time and date
View the event log
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to Log
4.	Press [Ent]	The last event appears
5.	Press [A]	To scroll though events
6.	Press [Esc]	Display shows Log
7.	Press [Esc]	Display shows Current time and date
Keypad personal attack alarm
1.	Press and hold [A] and [B]	Only when pre programed
Set control panel time/clock
1.	Enter [User code]
2.	Press [Ent]
3.	Press [A]	To scroll to Time
4.	Press [Ent]	Display show Time
5.	Enter [time in 24 hour format]	Display shows new time
6.	Press [Ent]	to save and Display shows Time again
7.	Press [A]	To scroll to Date
8.	Press [Ent]	Display shows the date
9.	Enter new date
10.	Press [Ent]	To save date
11.	Press [Esc]	Display shows Time
12.	Press [Esc]	Display shows Current time and date
		Back to Index