Texecom Veritas User Instructions

Back to Index
 
Full set the system
1. Enter [User code]
2. Press [FULL] Exit tone sounds
Part set the system
1. Enter [User code]
2. Press [PART] Exit tone sounds
Unset the system
1. Enter [User code] Entry tone stops
Reset system after alarm condition
1. Enter [User code]
2. Press [RESET]
Omit a zone
1. Set system as Full or Part set above
2. Press [OMIT]
3. Enter [zone number(s) to omit]
4. Press [PROG] Zones are omitted
Change your own user code
1. Enter [User code]
2. Enter [0] [0] [0] [1]
3. Enter new [User code]
4. Press [PROG]
5. Press [RESET] Code now changed
Test the alarm sounders
1. Enter [User code]
2. Enter [0] [0] [0] [5]
3. Press [4] [3] [2] [1] in turn Sounders sound
4. Press [RESET]
5. Press [RESET]
Walk test the detection devices
1. Enter [User code]
2. Enter [0] [0] [0] [6] Walk test detectors, tone changes to indicate active zones
3. Press [RESET]
4. Press [RESET
 
  Back to Index